13–24/60개 결과 표시

Show sidebar
Filters

IM3536

  • 측정 주파수 DC, 4Hz ~ 8MHz
  • 측정 시간 : 최속 1ms
  • 기본 정확도 : ± 0.05 % rdg
  • 1mΩ부터 시작하는 정확도 보증 범위, 저 임피던스 측정도 안심
  • DC 바이어스 측정의 내부 발생 가능
  • 연구 개발부터 생산 라인까지 폭넓은 분야에서 활약

IM3536 데이터 시트 다운로드

IM7580 Series

  • 측정 주파수 100 kHz or 1 MHz ~ 300 MHz or 600 MHz or 1.3 GHz
  • 측정 시간 : 빠른 0.5ms
  • 기본 정확도 : 0.72% rdg. Or .65% rdg
  • 하프랙 사이즈의 컴팩트한 본체
  • 광범위한 접촉 체크(via DCR testing, Hi-Z reject or waveform judgment)
  • 아날라이저 모드에서 측정주파수, 측정신호 레벨을 sweep하며 측정

IM7580 시리즈 데이터 시트 다운로드

K Series

The K Series is a range of “micro-clamps” for accurate measurements of very low direct and alternating currents.

Their small size and their shape make them ideal for exploring and measuring in places where access is difficult.

LF Series

LF Series

Programmable DC Electronic Load

Cost-Effective and 19inch Rack mount standard.

150W~20kW 용량의 고성능, 고효율의 프로그래머블 전자로드로써 SCPI(Standard Commands for Programmable Instruments) 프로토콜에 준하는 RS-232C, RS-485, TCP/IP(option)통신을 지원하며 19inch Rack에 장착이 가능하도록 설계되었습니다.

LP Series

LP Series

Programmable DC Electronic Load

High Performance, High Precision

LP Series는 300W~1500W 용량의 고성능, 고효율의 프로그래머블 전자로드로써 SCPI(Standard Commands for Programmable Instruments) 프로토콜에 준하는 RS-232C, RS-485, USB 통신이 가능하도록 되어있습니다.

MINI series

Small, compact and particularly resistant, this range of miniature clamps is designed for measurements from a few milli-amperes to 150 A ac. Their shape makes them very practical in confined spaces, such as circuit-breaker boards, control panels or control boxes. They are ideal for use with multimeters.

MN series

The MN series of miniclamps (11 standard models) are designed to measure AC current from 10mA to 600A peak AC, with a wide bandwidth.

MR8847A

메모리 하이코더

*5종류의 유닛을 새롭게 추가, 전체 13유닛에 대응

*발생과 기록의 2가지 역항을 1대로 구현,  측정한 이상 파형을 재현하여 출력

*아날로그 16Ch+로직 표준 16Ch~아날로그 10Ch로직 64Ch

*20MS/s 고속 샘플링, Ch간 절연

NVR-R631(DVK)

The NVA-R631 is a ready-to-use impulse radar transceiver based on the NVA6100 single chip impulse radar from Novelda. The NVA-R631 delivers a complete front end solution for remote sensing applications, and can be used as a plugin to existing systems, or as part of a prototyping system based on the NVA-R631 Development Kit I/O module and software.

OPE-DI Series

OPE-DI Series

Linear Programmable DC Power Supply

경제적인 가격의 2채널 리니어 파워 서플라이

OPE-DI Series는 고효율의 프로그래머블 직류전원 공급장치로써 SCPI (Standard Commands for Programmable Instruments) 프로토콜에 준하는 RS-232C 또는 RS-485 통신을 또는 RS-485 통신을 지원하며 Bench-top 뿐만 아니라 19inch Rack에 장착이 가능하도록 설계되었습니다.
PC Interface기반하에 실험실에서는 분석을, 산업현장에서는 품질관리 등 다목적으로 활용할 수 있습니다

OPE-Q Series

OPE-Q Series

Linear Programmable DC Power Supply

경제적인 가격의 4채널(가변출력 2CH, 고정출력 2CH) 리니어 파워 서플라이

OPE-Q Series는 고효율의 프로그래머블 직류 전원공급장치로써, SCPI (Standard Commands for Programmable Instruments) 프로토콜에 준하는 RS-232C 또는 RS-485 통신을 또는 RS-485 통신을 지원하며 Bench-top 뿐만 아니라 19inch Rack에 장착이 가능하도록 설계되었습니다.
PC Interface기반하에 실험실에서는 분석을, 산업현장에서는 품질관리 등 다목적으로 활용할 수 있습니다

OPE-QI Series

OPE-QI Series

Linear Programmable DC Power Supply

경제적인 가격의 4채널(가변형 2CH, 고정출력 2CH) 리니어 파워 서플라이

OPE-QI Series 는 고효율의 프로그래머블 직류 전원공급장치로써 SCPI (Standard Commands for Programmable Instruments) 프로토콜에 준하는 RS-232C 또는 RS-485 통신을 또는 RS-485 통신을 지원하며 Bench-top 뿐만 아니라 19inch Rack에 장착이 가능하도록 설계되었습니다.
PC Interface기반하에 실험실에서는 분석을, 산업현장에서는 품질관리 등 다목적으로 활용할 수 있습니다