B102 클램프는 대지를 향해 흐르는 누설 전류를 측정하기 위해 설계되었다. 연결된 장비를 분리하지 않고 고장을 찾거나 예상할 수 있다. 그것은 전원 회로의 낮은 고장 전류를 감지하도록 특별히 설계되었다.
The D Series is a range of transformer clamps for accurate measurement of alternating currents up to 3,000 A.
The rectangular jaw shape, the quality of the magnetic circuits and the evenly-distributed winding makes it ideal for accurate measurements on large cables or busbars.
The C Series is a range of high-performance 1,000 A transformer clamps. The round jaw shape and the uniformly-distributed winding guarantee accuracy and minimum phase difference.
It is equipped with an oscillating magnetic element adjustment system and a patented system for gradual assisted jaw opening.
Its Ø 52 mm clamping capacity allows current measurements on most conductors on CAT III 600 V industrial and tertiary installations
절연저항 & 연속성 테스터
• 1.3 – 4.4 GHz frequency range
• Up to 9.15 dBi gain
• 50 Ohm impedance
– Antenna Type: 2-Arm Sinuous
– Frequency Range: 6.00 – 8.50 GHz
– Opening Angle: typ. 65° (Vertical) x 85° (Horizontal)
– Connector on right side
– Gain: typ. 6.0dBi
– Polarisation: Linear
– Impedance: 50Ω, unbalanced
– VSWR: typ. < 2.1:1
– Max. Power: 1W EIRP
– Size: 45 x 45 x 14mm
– Connector: SMA
절연 결함이나 RCD의 때아닌 트립이 발생할 경우 F65 클램프는 지상으로 흐르는 누설 전류를 감지하고 측정하기 위한 이상적인 툴이다.
다용도 F65 클램프는 멀티미터 클램프의 모든 기능도 제공한다.
또한 F65 클램프에는 RMS 컨버터가 장착되어 왜곡된 신호가 존재하는 경우에도 측정값이 정확하게 유지되도록 한다.
YN SERIES The Y series clamps are designed to be both rugged and versatile whilst remaining easy to use. The jaws are designed so that the clamps can be hooked onto cables or clamped onto busbars for current measurement up to 600 A AC.
The X4M202 is a Respiration Sensor based on the X4M06 hardware module. It is certified and holding regulatory approvals for Korea (KCC), and is ready to be integrated straight into commercial products without the end products having to run UWB RF specific tests through a Telecommunications Certification Body.
